WSS Mastic Wraparound Heat Shrinkable Sleeve Inner Diameter 50 - 3200MM , Material PE
1. Product Introduction
WSS(M) series of mastic heat shrinkable wraparound sleeves are consist of a radiation cross-linked heat shrinkable backing coated on the inside with a mastic adhesive. While the modified polyethylene material of the backing offers superior mechanical protection, the specially formulated adhesive offers excellent corrosion protection under demanding conditions.
2. Technical Parameter
| Temperature Degree | WSS(M)50 | WSS(M)80 |
| Max Operating Temperature | 50℃ | 80℃ |
| Suitable Coating | PE,FBE,PP,STEEL | PE,FBE,PP,STEEL |
| Preheat Temperature to Steel | 60℃ | 85℃ |
| Rust Cleaning Degree | Sa2.5,St3.0 | Sa2.5,St3.0 |
| Property | Test Method | WSS(M)50 | WSS(M)80 |
| Backing |
| Tensile Strength (psi) | ASTM D638 | 2500 | 3000 |
| Elongation (%) | ASTM D638 | 550 | 600 |
| Hardness Shore D | ASTM D2240 | 45 | 45 |
| Shrink Force (psi) | ASTM D638 | 35 | 35 |
| Dielectric (KV/mm) | ASTM D149 | 20 | 20 |
| Volume Resistance (Ω.cm) | ASTM D257 | 1.0x1016 | 1.0x1016 |
| Water Proof (%) (WT) | ASTM D570 | <0.1 | <0.1 |
| Adhesive |
| Softening Point(℃) | ASTM E28 | 80 | 120 |
| Lap Shear (N/cm2 )@23℃ | DIN EN12068 | 104 | 130 |
| Installed Product |
| Peel Strength (N/cm)@23℃ | DIN EN12068 | 50 | 50 |
| Impact Resistance(J) | DIN EN12068 | >15 | >15 |
| Indentation Resistance (mm) | DIN EN12068 | >1 @50℃ | >1@80℃ |
| Cathodic Disbonding (mm rad) | DIN EN12068 | <12 | <12 |
| Resistance to thermal Aging | DIN EN12068 | 100d @50℃ | 100d @80℃ |
| Tensile Strength Ratio | DIN EN12068 | 0.9 | 0.9 |
| Elongation Ratio | DIN EN12068 | 0.9 | 0.8 |
Please contact us for more details.
3. Specification Packaging
| Pipe Size | Pipe OD | Sleeve Length | Closure Width |
| | | | |
| DN | Inch | (mm) | (mm) | (mm) |
| 100 | 4 | 114 | 505 | 100 |
| 125 | 5 | 141 | 600 | 100 |
| 150 | 6 | 168 | 690 | 100 |
| 200 | 8 | 219 | 860 | 100 |
| 250 | 10 | 273 | 1040 | 125 |
| 300 | 12 | 325 | 1240 | 125 |
| 350 | 14 | 355 | 1320 | 125 |
| 400 | 16 | 406 | 1480 | 125 |
| 450 | 18 | 457 | 1660 | 125 |
| 500 | 20 | 508 | 1830 | 125 |
| 600 | 24 | 610 | 2160 | 150 |
| 700 | 28 | 711 | 2500 | 150 |
| 800 | 32 | 813 | 2840 | 150 |
| 900 | 36 | 914 | 3160 | 150 |
| 1000 | 40 | 1016 | 3530 | 200 |
Please contact us for other OD details.
4. Purchase Guide
Example: WSS(M)50Φ219x500-1.2/1.0 (mm)
1, WSS(M):Product code,measure unit:PC,Roll or M2.
2, 50:Operating Temperature.
3, Φ219:Suitable steel OD,range: Φ114-2200mm.
4, 500:Sleeve width,range 50-720mm.
5, 1.2:Backing thickness,range:1.0-1.5mm.
6, 1.0:Adhesive thickness,range:0.8-2.0mm.
WSS(M)50& WSS(M)80 sleeves can be delivered as kits or in roll form e.g “30M”. Each factory assembled kit will consist of one sleeve, suitable for a particular pipe size, a separate closure seal.If the pipeline steel is coated a insulation layer such as 30mm thickness,we need to recalculate the pipeline OD and sleeve length,even closure width sometimes,e.g: pipeline OD:219+(30x2)=279. In the event of ordering sleeve rolls, closure seals can be ordered separately.
5. Ordering Information
Packing
1. By diffrent cartons and plastic pallents.
2. Anonymous packing is available.
3. OEM packing is available.
4. Do as customer's requirements.
Delivery
1. Our factory is nearby Shanghai.
2. Other seaport is acceptable.
3. Do as customer's requirements.
6. Application Case
