Cold shrink cable breakout factory supplier ZT , 2-0#-2-4# , Silicon Rubber , Black , Grey
1. Product Information
The Cold Shrink Silicone Rubber 2,3,4,5/C (2,3,4,5 conductor) Cable Breakout are a series of open-ended molded silicone rubber sealing assemblies that are factory expanded and mounted on removable inner supporting plastic cores. They are supplied for field installation in a pre-stretched condition. The supporting cores are removed after the seal has been positioned for installation around the breakout area of a 2,3,4,5/C (2,3,4,5 conductor) cable. Core removal allows the silicone rubber to shrink down to a predetermined diameter, creating an environmental enclosure for individual cable phase legs and overall cable jacket.
1. Manufactured from silicone rubber
2. Simple and fast installation meeting a variety of configuration requirements
3. Providing sealing protection over multi-core cable crutch, including 2,3,4,5 core breakouts
2. Technical Parameter
| Property | Test Method | Result |
| Tensile strength | ASTM D638 | ≥12MPa |
| Elongation | ASTM D638 | ≥450% |
| Dielectric strength | ASTM D257 | ≥25kv/mm |
| Stress cracking resistance | ASTMD1693 | No cracking |
| Volume resistivity | ASTM D149 | ≥1×1014Ω·cm |
| Water absorption | ASTM D570 | <0.5% |
3. Specification Packaging
| Size | Before Shrinking(mm) | After Shrinking(mm) |
| | ID | Length | ID | Length |
| | Finger | Boot | Finger | Boot | Total | Finger | Boot | Finger | Boot | Total |
| 2-0# | 12 | 35 | 30 | 50 | 80 | 3.5 | 16 | 40 | 60 | 100 |
| 2-1# | 16 | 44 | 35 | 70 | 105 | 5 | 21 | 45` | 80 | 125 |
| 2-2# | 25 | 60 | 50 | 80 | 130 | 7.5 | 28 | 60 | 100 | 160 |
| 2-3# | 32 | 72 | 55 | 85 | 140 | 11 | 38 | 65 | 105 | 170 |
| 2-4# | 39 | 95 | 55 | 95 | 150 | 12 | 42 | 70 | 110 | 180 |
4. Ordering Information
Packing
1. By diffrent cartons and plastic pallents.
2. Anonymous packing is available.
3. OEM packing is available.
4. Do as customer's requirements.
Delivery
1. Our factory is nearby Shanghai.
2. Other seaport is acceptable.
3. Do as customer's requirements.
5. Application Case
