10-36kV Heat Shrink Stress Control Tube For Cable Termination And Straight Joint SCT , φ30-φ85mm
1. Product Introduction
SCT series of heat shrink stress control tube are made from polyolefin material and suitable for power cable termination and joint up to 36kv for providing effective stress control.
2. Technical Parameter
| Property | Test Method | Result |
| Tensile strength | ASTM D638 | 12 N/mm2 |
| Elongation | ASTM D638 | 400% |
| Dielectric strength | ASTM D149 | 20kv/mm |
| Volume resistivity | ASTM D257 | 1x108-10Ω.cm |
| Longitudinal Change | ASTM D2671 | Inside +/- 10% |
| Eccentricity | ASTM D2671 | <30% |
| Water absorption | ASTM D570 | <0.5% |
3. Specification Packaging
| Size | Before Applied (mm) | After Applied (mm) | Packing (M/Spool) |
| | Inner Diameter | Inner Diameter | Inner Wall Thickness | |
| Ø30/11 | ≥30 | 11 | 2.1 | 100～1.22M) |
| Ø35/14 | ≥35 | 14 | 2.1 | 100～1.22M |
| Ø40/17 | ≥40 | 17 | 2.1 | 100～1.22M |
| Ø45/20 | ≥45 | 20 | 2.1 | 100～1.22M |
| Ø55/25 | ≥55 | 25 | 2.4 | 100～1.22M |
| Ø70/29 | ≥70 | 29 | 3.2 | 100～1.22M |
| Ø85/40 | ≥85 | 40 | 3.6 | 100～1.22M |
4. Ordering Information
Packing
1. By diffrent cartons and plastic pallents.
2. Anonymous packing is available.
3. OEM packing is available.
4. Do as customer's requirements.
Delivery
1. Our factory is nearby Shanghai.
2. Other seaport is acceptable.
3. Do as customer's requirements.
5. Application Case
