Clear dual wall tube with glue , Material PE , Clear , φ3.2-125mm
1. Product Introduction
DWDRS series adhesive-line dual wall tube are adhesive lined heat shrink tubing with environmental sealing capability for a wide variety of electrical applications, including automotive and marine wire harness, wire splices, breakouts, and connector-to-cable transitions.It has passed heat shock test , and water apsorption ratio is less than 0.5% .
Shrink ratio:2:1 3:1
Colors;black, red,yellow,green,blue
Special colors can be customized according to the customer with the color card
2. Technical Parameter
PE Base Property
| Property | Test Method | Result |
| Tensile Strength | ASTM D638 | 10.3Mpa |
| Elongation | ASTM D638 | ≥300% |
| Dielectric Strength | ASTM D149 | ≥ 15kV/mm |
| Volume Resistivity | ASTM D257 | ≥ 1014Ω.cm |
| Longitudinal Change | ASTM D2671 | -10%～+10% |
| Flame Retardant | UL224,VW-1 | Pass |
| Heat Shock | ASTM D2671 | Pass |
| Cold Blend | ASTM D2671 | Pass |
| Water Absorption Ratio | ASTM D570 | <0.5% |
Hot Melting Adhesive Property
| Property | Test Method | Result |
| Water Absorption Ratio | ASTM D570 | <0.2% |
| Softening Point | ASTM E8 | 95℃ |
| Peeling Strength (PE) | ASTM D1000 | 120N/25m |
| Peeling Strength (AL) | ASTM D1000 | 80N/25m |
3. Specification Packaging
3:1 Ratio
| Size | Before Applied | After Applied(mm) | Package |
| Inch | mm
| Inner Diameter
(mm) | Inner Diameter
(mm) | Wall
Thickness | Adhesive
Thickness | M/Spool |
| Ø1/8 | Ø3.2 | 3.2 | 1.0 | 0.90±0.15 | 0.35±0.10 | 200 |
| Ø3/16 | Ø4.8 | 4.8 | 1.6 | 1.00±0.15 | 0.40±0.10 | 100 |
| Ø1/4 | Ø6.4 | 6.4 | 2.20 | 1.25±0.15 | 0.45±0.12 | 100 |
| Ø5/16 | Ø7.9 | 7.9 | 2.70 | 1.30±0.15 | 0.50±0.12 | 100 |
| Ø3/8 | Ø9.5 | 9.5 | 3.20 | 1.40±0.15 | 0.50±0.12 | 50 |
| Ø1/2 | Ø12.7 | 12.7 | 4.20 | 1.70±0.15 | 0.50±0.12 | 36.6 |
| Ø5/8 | Ø15.0 | 15 | 5.20 | 1.80±0.15 | 0.55±0.15 | 30.5 |
| Ø3/4 | Ø19.1 | 19.1 | 6.30 | 1.95±0.15 | 0.55±0.15 | 30.5 |
| Ø1 | Ø25.4 | 25.4 | 8.50 | 2.05±0.20 | 0.55±0.15 | 30.5 |
| Ø1-1/4 | Ø30.0 | 30 | 10.20 | 2.20±0.20 | 0.60±0.15 | 24.4 |
| Ø1-1/2 | Ø39.0 | 39 | 13.50 | 2.50±0.20 | 0.60±0.15 | 18.3 |
| Ø2 | Ø50.0 | 50 | 17.00 | 2.80±0.25 | 0.70±0.15 | 12.2 |
| Ø5/2 | Ø64 | 64 | 21.00 | 3.00±0.25 | 0.70±0.15 | 6.1 |
| Ø3 | Ø75 | 75 | 25.00 | 3.00±0.30 | 1.00±0.20 | 1.22 |
| Ø7/2 | Ø90 | 90 | 30.00 | 3.00±0.30 | 1.00±0.20 | 1.22 |
| Ø4 | Ø100 | 100 | 34.00 | 3.00±0.30 | 1.00±0.20 | 1.22 |
| Ø5 | Ø125 | 125 | 42.00 | 3.00±0.30 | 1.00±0.20 | 1.22 |
4:1 Ratio
| Size | Before Applied | After Applied(mm) | Package |
| Inch | mm | Inner Diameter
(mm) | Inner Diameter
(mm) | Wall
Thickness | Adhesive
Thickness | M/Spool |
| Ø5/32 | Ø4.0 | 4 | 1 | 1.1±0.15 | 0.4±0.15 | 200 |
| Ø1/4 | Ø6.0 | 6 | 1.5 | 1.5±0.15 | 0.5±0.15 | 100 |
| Ø5/16 | Ø8.0 | 8 | 2 | 1.7±0.15 | 0.5±0.15 | 50 |
| Ø1/2 | Ø12.0 | 12 | 3 | 2.0±0.15 | 0.6±0.15 | 1.22m/pc |
| Ø5/8 | Ø16.0 | 16 | 4 | 2.3±0.25 | 0.6±0.15 | 1.22m/pc |
| Ø25/32 | Ø20.0 | 20 | 5 | 2.6±0.25 | 0.6±0.15 | 1.22m/pc |
| Ø1 | Ø24.0 | 24 | 6 | 3.0±0.30 | 0.7±0.15 | 1.22m/pc |
| Ø3/2 | Ø32.0 | 32 | 8 | 3.0±0.30 | 0.7±0.15 | 1.22m/pc |
| Ø2 | Ø52.0 | 52 | 13 | 3.3±0.30 | 0.7±0.15 | 1.22m/pc |
4. Ordering Information
Packing
1. By diffrent cartons and plastic pallents.
2. Anonymous packing is available.
3. OEM packing is available.
4. Do as customer's requirements.
Delivery
1. Our factory is nearby Shanghai.
2. Other seaport is acceptable.
3. Do as customer's requirements.
5. Application Case
