Single Wall Heat Shrink Wrap Tubing , VW - 1 Colored Heat Shrink Tubing
1. Product Introduction
VWDRS flame resistance tube is a heat shrink tube with thin wall.
For this type heat shrink tube, the material is flame resistant and reach VW-1 standard.
It is a very good flame resistance heat shrink tube.
This heat shrink tube is widely used to the cable and wire insulation and protection that need good fire resistance.
Shrink ratio is 2:1,
Continuous operating temperature:-55 ℃ to 125 ℃
Fully shrink temperature:12 5 ℃
2. Technical Parameter
| Property | Test Method | Result |
| Tensile Strength | ASTM D638 | 12 N/mm2 |
| Elongation | ASTM D638 | 300% |
| Heat Shock@250℃/30’ | ASTM D2671 | No Cracking .No Flow |
| Cold Blend@-30℃ | ASTM D2671 | No Cracking |
| Dielectric Strength | ASTM D149 | 15kv/mm |
| Voltage Withstand | @2.5kv for 60 sec | No breakdown |
| Volume Resistivity | ASTM D257 | 1x1014Ω.cm |
| Longitudinal Change | ASTM D2671 | Inside +/- 5% |
3. Specification Packing
2:1 Ratio
| Size | Before Applied (mm) | After Applied (mm) | Package |
| (mm) | Internal Diameter | Wall Thickness | Internal Diameter | Wall Thickness | (M/Spool) |
| Ø3.0/1.5 | 3.5±0.2 | 0.18±0.05 | ≤1.5 | 0.35±0.05 | 200 |
| Ø3.5/1.75 | 4.0±0.2 | 0.18±0.05 | ≤1.75 | 0.40±0.05 | 200 |
| Ø4.0/2.0 | 4.5±0.2 | 0.20±0.05 | ≤2.0 | 0.40±0.05 | 100 |
| Ø5.0/2.5 | 5.5±0.3 | 0.20±0.08 | ≤2.5 | 0.40±0.08 | 100 |
| Ø6.0/3.0 | 6.5±0.3 | 0.20±0.08 | ≤3.0 | 0.40±0.08 | 100 |
| Ø7.0/3.5 | 7.5±0.3 | 0.20±0.08 | ≤3.5 | 0.42±0.08 | 100 |
| Ø8.0/4.0 | 8.5±0.3 | 0.20±0.08 | ≤4.0 | 0.42±0.08 | 100 |
| Ø9.0/4.5 | 9.6±0.3 | 0.22±0.08 | ≤4.5 | 0.45±0.08 | 100 |
| Ø10.0/5.0 | 10.6±0.4 | 0.22±0.08 | ≤5.0 | 0.45±0.08 | 100 |
| Ø11.0/5.5 | 11.6±0.4 | 0.22±0.10 | ≤5.5 | 0.45±0.10 | 100 |
| Ø12.0/6.0 | 12.6±0.4 | 0.22±0.10 | ≤6.0 | 0.45±0.10 | 100 |
| Ø13.0/6.5 | 13.6±0.4 | 0.23±0.10 | ≤6.5 | 0.46±0.10 | 100 |
| Ø14.0/7.0 | 14.6±0.4 | 0.23±0.10 | ≤7.0 | 0.46±0.10 | 100 |
| Ø15.0/7.5 | 15.6±0.5 | 0.23±0.10 | ≤7.5 | 0.46±0.10 | 100 |
| Ø16.0/8.0 | 16.6±0.5 | 0.25±0.10 | ≤8.0 | 0.50±0.10 | 100 |
| Ø18.0/9.0 | 18.6±0.5 | 0.25±0.10 | ≤9.0 | 0.55±0.10 | 100 |
| Ø20.0/10.0 | 20.6±0.6 | 0.25±0.10 | ≤10.0 | 0.55±0.10 | 100 |
| Ø22.0/11.0 | 22.6±0.6 | 0.28±0.10 | ≤11.0 | 0.60±0.10 | 100 |
| Ø25.0/12.0 | 25.6±0.6 | 0.30±0.10 | ≤12.0 | 0.65±0.10 | 25 |
| Ø28.0/14.0 | 28.8±0.8 | 0.30±0.10 | ≤14.0 | 0.65±0.10 | 25 |
| Ø30.0/15.0 | 30.8±0.8 | 0.33±0.10 | ≤15.0 | 0.70±0.10 | 25 |
| Ø35.0/17.5 | 36.0±1.0 | 0.35±0.10 | ≤17.5 | 0.75±0.10 | 25 |
| Ø40.0/20.0 | 41.0±1.0 | 0.35±0.10 | ≤20.0 | 0.75±0.10 | 25 |
| Ø50.0/25.0 | 51.0±1.0 | 0.40±0.10 | ≤25.0 | 0.80±0.10 | 25 |
| Ø60.0/30.0 | 61.0±1.0 | 0.40±0.10 | ≤30.0 | 0.80±0.10 | 25 |
| Ø70.0/35.0 | 71.0±1.0 | 0.40±0.10 | ≤35.0 | 0.80±0.10 | 25 |
| Ø80.0/40.0 | 81.0±2.0 | 0.45±0.10 | ≤40.0 | 0.90±0.10 | 25 |
| Ø90.0/45.0 | 91.0±2.0 | 0.45±0.10 | ≤45.0 | 0.90±0.10 | 25 |
| Ø100.0/50.0 | 102.0±2.0 | 0.50±0.10 | ≤50.0 | 1.0±0.20 | 25 |
| Ø120.0/60.0 | 122.0±2.0 | 0.50±0.10 | ≤60.0 | 1.0±0.20 | 25 |
| Ø150.0/75.0 | 152.0±2.0 | 0.50±0.10 | ≤75.0 | 1.0±0.20 | 25 |
4. Ordering Information
Packing
1. By diffrent cartons and plastic pallents.
2. Anonymous packing is available.
3. OEM packing is available.
4. Do as customer's requirements.
Delivery
1. Our factory is nearby Shanghai.
2. Other seaport is acceptable.
3. Do as customer's requirements.
5. Application Case
