Colourful Ultra Thin Wall Heat Shrink Tubing - 55 - 125℃ Operating UTDRS
1. Product Introduction
TSDRS heat shrink tube is 3:1 shrink ratio tube with thin wall that are made of polymer material
This heat shrink tubing is widely used to the cable and wire insulation and protection that diamension is
change more than 2:1 shrink ratio and less than 3:1 ratio.
The material is Rohs approval and without halogen material.
This heat shrink tubing tube is not flame resistance,but it is low smoke generation if burning
Shrink ratio is 3:1,
Continuous operating temperature:-55 ℃ to 125 ℃
Fully shrink temperature:125 ℃
2. Technical Parameter
| Property | Test Method | Result |
| Tensile Strength | ASTM D638 | 12 N/mm2 |
| Elongation | ASTM D638 | 300% |
| Heat Shock@250℃/30’ | ASTM D2671 | No Cracking .No Flow |
| Cold Blend@-30℃ | ASTM D2671 | No Cracking |
| Dielectric Strength | ASTM D149 | 15kv/mm |
| Voltage Withstand | @2.5kv for 60 sec | No breakdown |
| Volume Resistivity | ASTM D257 | 1x1014Ω.cm |
| Longitudinal Change | ASTM D2671 | Inside +/- 5% |
3. Specification Packing
2:1 Ratio
| Size | Before Applied (mm) | After Applied (mm) | Package |
| (mm) | Internal Diameter | Internal Diameter | Wall Thickness | (M/Spool) |
| Ø0.6CB | 0.90±0.20 | ≤0.40 | 0.20±0.10 | 200 |
| Ø0.8CB | 1.10±0.20 | ≤0.50 | 0.20±0.10 | 200 |
| Ø1.0CB | 1.40±0.20 | ≤0.65 | 0.20±0.10 | 200 |
| Ø1.5CB | 1.90±0.20 | ≤0.85 | 0.20±0.10 | 200 |
| Ø2.0CB | 2.40±0.20 | ≤1.00 | 0.22±0.10 | 200 |
| Ø2.5CB | 2.90±0.20 | ≤1.30 | 0.25±0.10 | 200 |
| Ø3.0CB | 3.40±0.20 | ≤1.50 | 0.28±0.10 | 200 |
| Ø3.5CB | 3.90±0.20 | ≤1.80 | 0.28±0.10 | 200 |
| Ø4.0CB | 4.40±0.20 | ≤2.00 | 0.30±0.10 | 200 |
| Ø4.5CB | 4.90±0.20 | ≤2.30 | 0.30±0.10 | 200 |
| Ø5.0CB | 5.50±0.20 | ≤2.50 | 0.32±0.10 | 100 |
| Ø6.0CB | 6.50±0.20 | ≤3.00 | 0.32±0.10 | 100 |
| Ø7.0CB | 7.50±0.30 | ≤3.50 | 0.32±0.10 | 100 |
| Ø8.0CB | 8.50±0.30 | ≤4.00 | 0.32±0.10 | 100 |
| Ø9.0CB | 9.50±0.30 | ≤4.50 | 0.35±0.10 | 100 |
| Ø10CB | 10.50±0.30 | ≤5.00 | 0.35±0.10 | 100 |
| Ø11CB | 11.50±0.30 | ≤5.50 | 0.40±0.10 | 100 |
| Ø12CB | 12.50±0.30 | ≤6.00 | 0.40±0.10 | 100 |
| Ø13CB | 13.50±0.30 | ≤6.50 | 0.40±0.10 | 100 |
| Ø14CB | 14.50±0.30 | ≤7.00 | 0.40±0.10 | 100 |
| Ø15CB | 15.50±0.40 | ≤7.50 | 0.40±0.10 | 100 |
| Ø16CB | 16.50±0.40 | ≤8.00 | 0.40±0.10 | 100 |
| Ø17CB | 17.50±0.40 | ≤8.50 | 0.40±0.10 | 100 |
| Ø18CB | 18.50±0.50 | ≤9.00 | 0.42±0.10 | 100 |
| Ø20CB | 20.50±0.50 | ≤10.00 | 0.45±0.10 | 100 |
| Ø22CB | 22.50±0.50 | ≤11.00 | 0.45±0.10 | 100 |
| Ø25CB | 25.50±0.50 | ≤12.50 | 0.45±0.10 | 50 |
| Ø28CB | 28.50±0.50 | ≤14.00 | 0.45±0.10 | 50 |
4. Ordering Information
Packing
1. By diffrent cartons and plastic pallents.
2. Anonymous packing is available.
3. OEM packing is available.
4. Do as customer's requirements.
Delivery
1. Our factory is nearby Shanghai.
2. Other seaport is acceptable.
3. Do as customer's requirements.
5. Application Case
